1 / 9
Cone of shame - Dog Lamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this Dog Lamp to be used with an Ikea HEMMA E27 lamp socket. After printing i realised i made it a little…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 1032
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
I designed this Dog Lamp to be used with an Ikea HEMMA E27 lamp socket.
I used a hot needle to poke 2 holes into the top of the dog, and then used 2 screws to fix the lamp socket to the dog.
I printed the cone with a 0.8mm Nozzzle and clear PETG.
You need to print the dog tag first and then put it on while printing.