1 / 4
Nightingale 2.0 Mag Shoe/Flare and Sling Point Replacement/Delete
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some more replacement parts for the nightingale 2.0
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 58
- Wydruki
- 2
- Wyświetlenia
- 1074
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (23)Powiązane
Print them in their easiest orientation. The carabiner replacement is a tougher print, and may need supports.
the grip shoe should use supports on build plate only. It has a fairly aggressive overhang. There is also a version that has more flare in the magwell. I probably will do some more of these, but this is a start.
all of these parts reuse existing hardware. Do not over tighten the screws into the mag shoe, otherwise you will strip the plastic.
Don't have a printer? Order from OOD! Affiliate link!