Hoot Hoot! Hooting Owl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cute owl for your garden which hoots when the wind blows by.
- Ocena
- 5 / 5
- Polubienia
- 163
- Pobrania
- 534
- Wydruki
- 14
- Wyświetlenia
- 2895
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updates
2026-09-10 Check out this awesome remix by @onus which adds a mold at the bottom to add some weight to the owl. The remix also contains printable eyes!
Place this decorative owl in your garden and listen to it hooting when the wind blows by!
Put the owl on a stick or just put it on at a windy place.
The right angle of attack is from the side: Place it at a spot where where wind blows by such that the window “blows over” the slit at the front, i.e., the wind blows at the owl from the side.
To silence the owl, simply turn it away from the wind. Depending on the strength and continuity of the wind, the owl will only occasionally hoot — it creates no noise disturbances!
Note: You must scale the Hooting Owl to the desired size
Height of 24cm for a richer, deeper sound
18cm Version with a lighter sound
Print Settings
Scale the model to the size you want! The larger the owl, the richer and deeper the sound! A height of at least 15cm is recommended!
Layer Height: 0.2mm
Supports: only one needed at the tip of the beak; use an enforcer and organic
Material: I used stone or wood PLA but you can experiment with other materials as well, e.g., glow in the dark!
OnShape Model
You can find the OnShape Model here, copy it and tinker around! Check the Variables Folder for some basic settings.