X-Carve with Quiet Spindle - JTech Laser Middle Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom laser cutter/engraver mount for the Quiet Spindle Holder in the X-Carve CNC Machine.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 519
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a custom laser cutter/engraver mount for the Quiet Spindle Holder in the X-Carve CNC Machine.
The laser head is built by JTechPhotonics. I use the 3.8 watt Version, but any head should fit (as of Sept/2017).
The mounting holes for the head are at about 2.0" from the work surface for enough clearance from the material to the collet. The beam focused perfectly within the factory recommended distance by fine tuning the Z-Axis.
See the Mounting Options forDewalt 611 Spindle:
Front DW611 Mount
Side DW611 Mount
More Info
More about Lasers
JTech Photonics
More about X-Carve CNC Machine
Inventables
Print instructions
Category: DIY Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: Any
Infill: 100%
Notes:
I use PLA with 100% InFill. Sometimes adding a 2-3mm brim might help with adhesion on thin parts, but most of the time it is not necessary for this kind of part.