1 / 5
Pontiac Firebird/Chevrolet Camaro 1968 Clock Housing with Bracket — zdjęcie 1
1 / 5

Pontiac Firebird/Chevrolet Camaro 1968 Clock Housing with Bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dash Clock Housing with Bracket for 1. Gen Firebird/Camaro.

Ocena
0 / 5
Polubienia
4
Pobrania
50
Wydruki
0
Wyświetlenia
433
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial

Dash Clock Housing with bracket for 1. Gen Firebird/Camaro. Bracket size may need to be adjusted to fit holes in center console.

Screw sizes:
Bracket to clock 0.4mm screw (hole: 0.38mm)
Housing to clock 0.3mm screw (hole: 0.275mm), can be replaced with screw (see files)
Bracket to dashboard 0.3mm hole (nut recommended)

Tip: Use a material with better heat resistance than PLA for the bracket. In my case, the bracket got soft and then the clock tipped over after using PLA.