Nendoroid display stand with box (Multiple sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stands for Nendoroids of various sizes and heights. Designed for printing with a 0.4 or 0.6 nozzle.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
The holes are only for the stand, not for accessories. Maybe I will make this option later. The stand has room for a box for storing spare parts.
The base dimensions range from 60x60 (same as original) up to 180x180 (60, 120 or 180 mm). The height of the stand is 8mm (same as original), 110mm and 210mm.
Rectangular stands have 2 options with a box hole on the short and long side.
Everything is printed without supports. The box is made for vase mode. Print stand as pictured, turn the part without wall on top. The 8 mm base just put any flat side down.
