CamelBak Dryer (Widemouth) Stand to Minimize Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dry your CamelBak Wide Mouth Bladder with plug in fan/stand. Buy Fan for ~$20 at https://amzn.to/45r67ny
- Ocena
- 4 / 5
- Polubienia
- 36
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 1205
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Eliminate Mold: I was looking for a design for a Camelbak powered drying stand. I didn't find one, so I took this idea and created something that would work with a fan that is sold on Amazon. https://amzn.to/45r67ny gets you to the link, and I think my sister gets an affiliate check of $0.20 if you buy one… Not exactly a get rich scheme, but if you get the exact match, you shouldn't have to mess with the .stl files to get it to work for you.
Screw Holes & Feet: Please double check the measurement for the screw holes on your fan, and I recommend feet to drain water away from the power source. (Feet also keep the screws from gouging your kitchen counter/horizontal surface.)
Recommend: Put half of a rolled up paper towel at the bottom of your bladder to trap the drops that fall down inside the bladder.