Mammotion Luba RTK antenna wall mount with winter cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount that I think is more discrete than a lot of other options.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 1168
- Wydruki
- 3
- Wyświetlenia
- 5320
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wasn't really happy with the alternatives and wanted a mount that would blend in well with the antenna and the wall.
My copy printed in Prusament PETG on a Mini with 0.6 nozzle, input shaper and 0.25 mm structural setting. I hope the PETG will be sufficiently resistant to outdoors exposure over time.
Check out https://printshape.se/mammotion/mammotion-luba-rtk-antenna-faeste.html if you want a professionally printed version in ASA!
Plenty of perimeters are recommended for good strength.
I didn't initially consider that the rotation of the downward facing antenna (mount) needs to be properly situated at a point ideally at the furthest point from the wall when the full antenna assembly is screwed into the wall mount, so I had to add a spacer that I then incorporated into the version uploaded here.
There are two versions:
Wall mount 2 has 44mm tube diameter and is the one in the pictures.
Wall mount 2b has 46mm tube diameter, giving a bit thicker material around the interior threads, which should make it stronger (though I haven't yet had any problem with the 44mm version in practice).
Update 2025-11-29
Added a winter cap which screws in from the top in place of the antenna when closing for the season. It has a lip that extends down the outside of the pipe, minimizing risk of water ingress.
Update 2025-12-06
Added an option with the cable hole going straight down instead, for those who prefer that mounting.