Donner DLP-124 Les Paul Pickguard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pickguard modified to fit the Donner DLP-124 Les Paul copy. It has been tweaked to properly fit around the Humbucker fra
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Print in any filament you want. I have heard that PLA doesn't last more than a couple of years for pickguards, but if you're anything like me you'll probably change it before then anyways. I printed it in 15% infill and it's as strong as it needs to be.
Print it face down if you're using a textured print bed. The bevels need no support.
Note: I changed the knobs to these: https://www.printables.com/model/207313-guitar-knob-6mm-split-shaft-pot-press-fit The original knobs, or others that are wider than these may not fit.