Flat suction system / Flachabsaugung
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Due to the floods in Lower Saxony in 2023/2024, I needed a shallow suction device for our pump. Thanks to 3D printing,…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 231
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Due to the floods in Lower Saxony in 2023/2024, I needed a shallow suction device for our pump. Thanks to 3D printing, I was able to quickly create a suction device that is screwed onto a one-inch hose and fastened with a clamp. This makes it possible to suck up to 2 mm (0.0787402 inch) with a pump. The device is not particularly large but still manages to supply a 3600 liter/hour pump.
V3 has additional bars to prevent collaps on intake
Print Settings
Printer Brand:
Creality
Printer:
CR-6 SE
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.28
Infill:
20%
Filament: any PLA/PETG
any
Category: Tools