Softbox/Reflector Mount with Angle Adjustment (16mm + 8mm Tube Coupler)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternative to an E-Type bracket, can be used to join any two tubes with diameters of 8mm and 16mm.
- Ocena
- 0 / 5
- Polubienia
- 66
- Pobrania
- 231
- Wydruki
- 0
- Wyświetlenia
- 940
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this fixture as an alternative to an E-Type bracket. Although originally intended as a softbox/reflector holder, it can be used to join any two tubes with diameters of 8mm and 16mm. It has 32 angles of adjustment (11.5 degree step). To assemble it you will need 3xM4 screws and 6xM4 nuts. It works quite well, but it requires you to mount your light separately, which means when adjusting the angle you have to do it twice - for the light and for the softbox/reflector. Hope you will find this useful, enjoy!
Print Settings
Printer:
Anycubic i3 Mega
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
100%
Filament: Whitebox PLA
Category: Camera