Tulip Custom Compact Nerf Blaster

This is tulip! Slab-PT powered, Linear Rail assisted, short dart blaster! Around the same size as an SBL-2!

Has the ability to shorten the prime with minimal power reduction, all the way down to a 6cm prime! Spring adjustment screw allows for the blaster's performance to be tuned on the fly!

This blaster was designed to take talon claw springs, and works really well with the SF25TC, hits anywhere from 150-210 fps on that spring depending on barrel setup and tuning!

I recommend using either an 8" or 10" barrel

Bars are a custom length, so if you don't want to use metal ones you can print your own, and those work great!

Full blaster can be printed on a 180x180x180 sized print bed

Get hardware from silverfox industries!

https://silverfoxindustries.shop/products/tulip-by-poppy-hardware-kit?_pos=1&_sid=cd8b82ec6&_ss=r

BOM (for self-sourcing, note this is mainly for people who may already have most of the hardware. I recommend buying from SFI if you don't already have hardware “laying around”): https://docs.google.com/spreadsheets/d/1-0wWjg9sVC6wl_7VZhChNdIpMWMwCTFtW-7b7HZMzbw/edit?usp=sharing

Assembly Video coming eventually, but assembly is pretty self-explainatory

Standard Print settings should be 4 walls, 20% gyroid infill but for the following parts use different settings:

5 walls 20% gyroid:

• Priming block

100% infill:

• Body bars

• Priming bars (if using printed ones)

• Unibody ram

• Sear

• Trigger

• Plunger

Big thanks to all the beta testers and esp to chance for helping so much with refining this thing