FIREFLY PENDANT FROM THE LAST OF US
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are two versions – one is optimized for printing flat on the bed and one that is meant to be printed vertically.
- Ocena
- 4 / 5
- Polubienia
- 40
- Pobrania
- 267
- Wydruki
- 2
- Wyświetlenia
- 823
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
There are two versions – one is optimized for printing flat on the bed and one that is meant to be printed vertically in case you have a jet engine for part cooling.
https://www.youtube.com/watch?v=vn2Kl8x3SYs - follow this tutorial to achieve aged metal look
Print Settings
Resolution:
0.1
Notes:
Print at a higher temperature for better interlayer adhesion (235-240°C for PLA), increase slicing resolution in Cura if the text is crooked, also check the "filter out tiny gaps" field to avoid stringing, its alright if the text is hollow
Category: Accessories
