Yet Another Parametric Box for Moose 3d Scanner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box that uses the original package foam from the Moose 3d Scanner to store the scanner, power brick, wires and tripod.
- Ocena
- 4,667 / 5
- Polubienia
- 34
- Pobrania
- 212
- Wydruki
- 3
- Wyświetlenia
- 1277
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Others have created something similar but do to the games Bambu Labs plays with the 3mf file, the current version of Prusa Slicer wouldn’t open the file. So I set out to make my own version. I have included the STLs and one 3mf if you want to use or modify the script on the cover of the box that I have in the picture. My version uses the foam from the box that the scanner came in that held the scanner and the power brick. I also create a divided tray with a notch that will allow the wrist strap to fit through to the section that the USB cable fits in. The second section will hold the 3d Maker Pro tripod or a similar small phone one. I used standard self-stick felt pads over the scanner and power pack to stop the scanner from getting scratched up and add a little bit of protection. I also wanted to have a handle to carry it. For hardware you will need four M3x30 screws and two M3x35 screws if you want to use the handle or six M3x30 screws if you don’t want the handle.