Micro Mini 13 Jointed Action Figure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As small as you can go with working ball joints. 50% the size of the original Mini 13. See images for scale.
- Ocena
- 4,333 / 5
- Polubienia
- 312
- Pobrania
- 3236
- Wydruki
- 3
- Wyświetlenia
- 10 153
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
As small as I could go with functional, working ball joints. Fused the armor and frames together except for the interconnecting, moveable joints.
- 0.12mm layer
- 2 walls, 50% infill
- Auto tree support, build plate, critical
- Print time <45min
The model is very tiny, very functional, and fun to play with. But since it is so small, the imperfections on the ball joints can cause problems. Doesn't have to be pretty, doesn't have to be perfect, but file/sand it down a bit.
Honestly, this little action figure is pretty cool, but it's not the most sturdy. I've printed quite a few and the joints are hit or miss, or maybe my smoothing technique isn't the best. I'm still a novice when it comes to 3D models. I was going to take this print down, or make it private, but decided to leave it up since it can be cool. Print at your own risk. Lol
Assembly instructions (needle nose pliers might be helpful):
