pingpong trophy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a pingpong trophy as a present for a company.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 409
- Wydruki
- 4
- Wyświetlenia
- 3668
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Made a pingpong trophy as a present for a company.
For the crown I used the model made by: mjmedien, https://www.thingiverse.com/thing:195852 and made it so it can hold a pingpongbat at an 5 degree angle. The slot where the bat sits in is 10mm wide.
For the crown and base I used "variable layerheight" so the roundings and details are at 0.2mm while the smooth parts are at 0.3mm.
Print instructions
Printed this on an Original Prusa MK2s, so the gcodes are ready to use. Before the meshbedleveling it wil wait 4 minutes to warm up.
Resolution: 0.2/0.3
Infill: 15%
Support: only for the crown
filament used:
- Real sparkle gold medal
- Fillamentum metallic grey
- Fillamentum vertigo galaxy
- Fillamentum traffic white