Brick Build Plate (multicolor remix - Countryside)

20x20 studs, to fit into an IKEA Kallax shelf. I also added some colored details. The brown tiles and red flowers were painted on in Prusaslicer, so I advise to use the .3mf file if you want to reproduce. The base, river, road and beach are separate parts for convenience.

Some notes on printing:
I found it necessary to test for good fit. You can download the 4x4 plate from the original project and play with scaling (test with 4x2 and 2x2 bricks, and place bricks next to each other). I'm using a popular brick brand, and scaling to 101 % works well for me. Adhesion is comparable to the original, if not even a bit better. I found some comments by other Prusa XL owners saying that they also used 101%, so I adjusted the .3mf file already. But YMMV, absolutely do test this.

You can of course change the colors/materials in the .3mf, but if you want to print it without fiddling, just load up the colors like so (filaments I used in brackets):
Tool 1 (grass): PLA, green (3DJake dark green)
Tool 2 (water): PLA, blue (3DJake sky blue) and transparent (3D Jake transparent)
Tool 3 (flowers): PLA, red (3DJake red)
Tool 4 (road tiles): PLA, brown (3DJake glitter brown)
Tool 5 (sand): PLA, sand (Fillamentum light ivory)

Total print time is about 20h. It is set up for a filament change on tool #2 at 1mm height after about 13h:45m (change blue to transparent to get a nice water effect).

This is not my design, just a remix. Neither my variant nor the original design are compatible with Duplo or Lego, and I'm not responsible if anyone modifies it (e.g. by rescaling) to be compatible.