Mount for a lighter-socket USB power supply on the frame of the Mini-El/City-el
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This makes it possible to mount a generic USB power supply for lighter socket, on the frame of a Mini-El/City-El.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Public Domain
Print at 0.3mm layer height or whatever suits you. PETG or ABS is recommended so it doesn't melt in the heat of the summer.
Clicks directly onto the frame wherever you like to put it. It's a loose fit - if you want it to grip tighter the clip portion can be bent with a little application of hot air so it's bent in a bit.
It should fit any generic lighter socket power supply. I just put two 0.75mm wires trough the back and soldered onto the terminals of the device (some power supplies only have one of the two outer springs connected, so test before soldering - Measure continuity with multimeter between spring and USB metal casing) - if they are connected you are good. Push it in and it's a friction fit.