1 / 2
Plant climber / Espalier
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for plants that like to go up :)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — NoDerivatives
Dome shaped espalier so the plant can climb freely.
- 20% infill
- 3-4walls
- Print laying down, tree support auto, can use brim aswell if you need. cleaned with deburring knife after printing.
- I printed in PETG
Printing: I printed with tree supports (auto) all parts laying down
Printed on Bambulab A1 I made it to fit 4 of each there. there so if u have smaller bed (like my mk4 I just scaled down or printed 1 at the time.
It's made so you can snap/press them into eachother, it requires some force. I added a bit of glue on the ends.
The picture is just showing Pieces: Top Cut and Bottom and connector.
You need 4x Top 4x Bottom 1x Connector. If you need extra lenght, print extenders. (I dont know if it will be stable.)