CASA MILO One Piece Front and Rear Skirts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These models are based on the work by Steve Builds and the Millennium Machines team. Single piece front and rear skirts
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
These models are based on the work by Steve Builds and the Millennium Machines team. Single piece replacement front and rear skirts for when you place Milo into a CASA enclosure.
You can just print two front parts if you do not wish to have any holes since front and back are the same frame layout.
Print Settings:
I used OrcaSlicer Auto Brim with a HoneyBadger textured plate, heat soaked the chamber and everything printed just fine.
Print at 100% since I already accounted for shrinkage.
Enjoy!