Dart Zone Thunderbolt Hybrid Pusher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows for both full-length and half-length darts to be used in the blaster.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 392
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
A replacement pusher for the Dart Zone Thunderbolt. Allows for both full-length and half-length darts to be used in the blaster.
This pusher requires a flywheeler-compatible magazine adapter, (not the Dart Zone half dart adapter!!) - I have a printable Katana/AF Pro magazine adapter designed specifically for the Thunderbolt here.
Unfortunately, with the way the blaster internals work, the WorkerMod adapter for Talon magazines doesn't work with this pusher unless you do some light shellcutting (which won't affect it's performance, in this blaster or others). For the exact place to cut it, refer to the pictures above.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Notes:
I'd recommend using something a bit more temperature resistant if you're taking this to an outdoor game, as at least where I live, the interior of cars will get hot enough to warp PLA.