1 / 1
CNC Diamond drag engraver (for TTC-450 / OpenBuilds / Other) — zdjęcie 1

CNC Diamond drag engraver (for TTC-450 / OpenBuilds / Other)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cheap and easy way for a spring-type diamond drag engraver using diamond bits from Aliexpress.

Ocena
0 / 5
Polubienia
11
Pobrania
59
Wydruki
0
Wyświetlenia
1027
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Spring-loaded diamond drag engraver for CNC - using 3 mm diameter cheap non-spring diamond bits from Aliexpress or other shops. Idea is not mine - I've seen something similar on CNC forums long time ago.

You can easily modify it to use short pen or marker instead of diamond engraver.

 

Bill of materials:

  • 3D printed plate adapter from this design
  • 6x M5x10 mm screw
  • C10-ER11-100L CNC collet chuck holder (diameter 10 mm, 100 mm length, ER11 collet)
  • 3.125 mm CNC ER11 collet
  • SMA10AJ linear rail bearing (or similar 10 mm one). 

    USE THE ONE WITH REGULATED RUNOUT - YOU WILL THANK ME LATER!! Without the regulation, default runout on single linear rail will be too big and engravings will look like shit.
  • 10 mm rod blocker (no idea what's the proper name for it)
  • 1 mm x 12.5 x 52 mm spring (or similar in length)


Instructions:

Screw all elements together as shown on the photo - mount plate holes are lined with TTC-450 CNC Z Axis gantry, you may need to drill or remix this design to match other machines.

In normal position spring should be loaded as little as possible.

Printing settings (CRITICAL!!)

Print settings are critical for proper operation because this mount plate must be as stiff as possible. Otherwise you will get large deflections during engraving with poor results.

 I'm using regular cheap PLA and those settings are dialed for that - probably PETG/ABS will work better but I have no experience with those.

Layer size: whatever (I use 0.24 mm)

Infill: 25% (or more)

Bottom layers: 6

Top layers: 6

Wall count: 6

Tagi