Minimalist Box with Deadpool engrave

I've continued trying out box designs, thinking about which ones can help make my desk more tidy.

I particularly wanted to try out some things with PLA+Wood, so I made this minimalist design of two boxes, one with a divider and one plain, plus a lid with a Deadpool design.

Then I looked at how to print it in a way that the finish was better than usual, in particular following some recommendations from this video.

I didn't make the spine that the video recommends but I did print (for now the lid and the simple box) using manual supports in OrcaSlicer (you can see it in one of the images)

Material: PLA+Wood (but it can be any type of PLA)
Infill: Grid 15%
Nozzle: 0.4
Layer Height: 0.2mm
Supports: Manual printing at 45º is recommended
Temperature: 210º-230º (it is the recommended one for PLA+Wood)

Note: I wanted to upload the gcode but it seems that there is some incompatibility between the one generated by OrcaSlicer and the one accepted by the site.

And if you found this design useful or interesting, maybe you want to buy me a coffee (which is always appreciated), or download the design and give it a like (which helps collect Prusameters)