MMU3 Buffer - With two Legs, Segmeters and Plate Holder with Screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original parts do not make the buffer stable, and attaching it to the printer is not an option with the enclosure.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 522
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
The original parts do not make the buffer stable, and attaching it to the printer is not an option with the enclosure.
The model contains several parts: a higher leg (+1 cm), a back-, top and bottom segmenter with honeycomb, and a plate holder with screws.
You can either use the plate holders or the segmenters or a mix.
For one plate holder, you need the following parts:
- 2x M3 x 30 mm Allen screws
- 2x M3 square nuts
For one segmenter (back, top or bottom), you need the following parts:
- 4x M3 x 30 mm Allen screws
- 4x M3 square nuts
For one leg, you may use two round self-adhesive anti slip pads with a diameter of 15 mm.
The other parts (segment and wheel) you can download from the original published by Prusa.
The models were created with FreeCAD 0.21.2.