1 / 1
Decorative Collars for 13 mm OD Tubing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are some decorative collars for 13 mm outer diameter tubing.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
I was making a Display Base for Lokis Chitauri Scepter, and I needed some collars that fit on the tubing. Since the display base design doesn't include the collars, I designed some of my own.
The end connectors are meant for attaching the tubing to the display stand rings. The other collars can be put where ever you think they look good. Try putting multiple collars next to each other for variety.
The tubing I used is Gardner Bender FLX-3810T Split Flexible Electrical Tubing, ⅜ inch.
Filament: PLA
Infill: 25%
Supports: None