The only rope tensioner you will ever need
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Every single rope tensioner i have tried has failed, so i have designed my own. Fixed many issues from other designs
- Ocena
- 4,917 / 5
- Polubienia
- 1464
- Pobrania
- 2460
- Wydruki
- 32
- Wyświetlenia
- 15 767
- Oceny
- 24
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Every single rope tensioner i have tried has failed, so i have designed my own. Fixed many issues from other designs
No points of high stress - Have not done long term tests, but with prior experience, PLA will easily stand up to long periods of high tension
Use more layer outlines depending on expected load
Please print a tensioner where the rope barely fits through the hole (for proper pinching)
XS AND S TEETH WILL NOT PRINT PROPERLY WITH FDM PRINTERS*
For this situation, Print “Without Teeth”. This still has the lip, but without the cut out triangles.
M Teeth and L Teeth will also have issues with a large nozzle (0.3mm+)
(T) = has Teeth
(WT) = Without Teeth
(WL) = Without Lip
Hole sizes:
XS diameter: 4.8mm
S diameter: 7.2mm
M diameter: 8.4mm
L diameter: 9.6mm
Please use a tensioner size that just barely fits the rope
(i also suggest scaling up or down in slicer to fit your rope)
.step files provided if you want to edit or remix the model
