Honda CBR1100XX Rear Indicator Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plugs for the rear indicator mount to fit aftermarket indicators
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
When you remove the original rear indicators on a Honda CBR1100XX it leaves a large flat plate with two holes. This adapter covers both holes and lets you mount a round-based aftermarket indicator onto the bike with the wires fed through the thread.
The mount on a 2004 injection model seems different to the older carb models but should still fit.
The design chamfers from the base to the round stem. The stem of the new indicator will push into this about 10mm.
You will need support to the plate to print this, as it includes a stud to fit the front hole and stop it from rotating.
Left and right are identical parts, so print two the same.