Quick-turning sleeves for retrofitting Allen keys
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for fast turning of Allen keys, from 2 mm for M 2.5 up to 6 mm for M 8. Also color coding.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If an M3 or M4 screw has not yet been tightened or has already been loosened, it can be turned easily. This is unnecessarily slow with the usual wrenches or wrenches with a T-handle. The sleeves have a hexagon on the inside and a non-slip star profile on the outside. They are simply pushed onto the hexagon of the key. The keys can then be turned quickly and easily between the fingers. If you print the sleeves in different colors, you also have color coding. Keys with colored sleeves are also easier to find if they are covered by other silver-colored tools on the table.
Printing with PET-G, 0,2 mm layer height.
In my case, the sleeves usually held, sometimes even having to be tapped onto the hexagon with a hammer. If a sleeve is too loose, print it a few percent smaller or fix it with a drop of glue. The smallest sleeve could be a bit tricky to print, I had to reduce the printing speed to 50%.
Translated with DeepL.com (free version)