Mounting socket for Belux Lifto / USM Haller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Socket to mount a Belux Lifto lamp on top of a USM Haller table leg.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
With the help of this socket you can mount a Belux Lifto lamp onto a leg of a USM Haller table.
Please be aware that you will still need a 10x22mm steel pin with an M6 internal thread and a small recess for a set screw. I didn't print this part but made it on my lathe as it wouldn't make sense to print from a structural perspective. To connect the pin with the adaptor you will need an M6x30mm socket head screw as well.
Dimensions of the pin: 10x22mm / recess needs to be 4mm wide and about 1.5mm deep, located 2.5mm from the top end.
The adaptor easily prints upside down without any supports. Used black PLA with 15% infill on my X1c.