Deadpool Ace of Spades Bust
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eastman's model of the 'Merch with the Mouth' XL / MMU multicolour slice
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 134
- Wydruki
- 2
- Wyświetlenia
- 853
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are two 5 colour slices of Eastman's Deadpool Bust - one with suit damage coloured, one with damage same colour as suit I fixed an issue with some of the solid infill printing the wrong colour and set it to print the purge tower and infill with a different extruder than the default #1 extruder that prints the main / red perimeter. I did this because the black filament I used costs ¼ of what the red costs me. All those settings can be restored to their defaults in the .3mf file enclosed. I also printed this at quality speed and 0.15mm layer height for a highest aesthetic quality print. Also, printed at this layer height supports are absolutely not needed.
PLA filaments I used
Prusa Opal Red
Matter 3D Basics Black and White
Prusament Galaxy Silver
Polymaker Poly - Terra Army Brown
Please hit the like ♥ and post your make with the “Post A Make” button (below the “DOWNLOAD” button) on this page :D
Please consider joining my Printables Club and follow me on:
Printables.com
www.facebook.com/profile.php?id=100082036420297
Twitter: @Ozzy_The_Artist
Thanks :o )