Radius gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gauge for measuring radiuses of 3-15mm.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After trying out the fillet radius finder made by victornpb, I designed my own version. I didn't feel the need for 1mm and 2mm radiuses, and don't need it to fit inside a caliper case, so mine goes up to 15mm. I also made it double-sided, so that I don't have to read numbers upside down.
The most important difference is that I didn't round off the points between radiuses. Instead, I've extended them, so that each radius straightens out for 1mm past the 90-degree point. I think this makes it easier to judge the fit, because the gauge can only sit flush to an object's corner when it's at a 45-degree angle.