1 / 4
3x4.25" Cross-Stitch frame
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame to hold Mill Hill Ornament kits.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 1086
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (38)Powiązane
This is a magnetic frame designed for the small Mill Hill ornament kits to preserve both your hands and the perforated paper. It keeps the perforated paper in great condition while also allowing you to hold it more easily or mound the work in a work stand like the Lowery needlework stand.
This has helped my wife while stitching these kits.
About the model
- Sized for D10x3mm magnets
- A pause is required just before covering the magnet holes!
- 12 magnets needed in total (6 per frame piece)
- Has holes for embedded magnets (10mmx3mm) tolerance of .1mm allowed in the holes for a SNUG press fit.
- Pause on the layer just before the magnet holes are covered to insert the magnets.
- Prints with NO supports.
- Print the model twice and sandwich together over the perforated paper.
⚠Caution
Be careful about the polarity of the magnets when printing the second frame piece.
Please leave me a like ✨ if this model is interesting to you and check out some of my other models.