MMU 3 holder for enclosures (Ceiling)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the Prusa MMU3, to mount it inside an enclosures .
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This holder can be used to mount your MMU 3 to your printer enclosure. I split the holder in different pieces and printed the middle pieces from a flexible material. This reduces the noise caused by the MMU and coupled into the enclosure.
You can mount the holder directly to the enclosure but I added two aluminum profiles (20x20mm). This way I can slide the MMU around to find the best position and I can also slide the MMU out for repairs. To get a good fit to the aluminum profiles, I added washers, hold in place by a 3D printed part.
Hardware:
- 4 M3 18mm long screws to mount the MMU to the holder
- 4 T Nuts for 20x20mm aluminum profiles
- 4 M3 screws to screw the holder to the aluminum profiles or enclosure
- 2 aluminum profiles 20x20mm 200mm long
- whatever you like to mount the aluminum profiles to the enclosure
- 4 washers
Printed with a Prusa MK4 and a MMU3 in PLA and a Flex Material from “ice” (old stuff that laying around)