1 / 5
Vanquish VRD sliders & body mounts for SBG (Carbon or 3D-printed) Volvo Sugga
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sliders and body mounts to fix the SBG (Carbon or 3D-printed) Volvo Sugga body onto the Vanquish Products VRD chassis
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 162
- Wydruki
- 0
- Wyświetlenia
- 1213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Sliders and body mounts to fix the SBG (Carbon or 3D-printed) Volvo Sugga body onto the Vanquish Products VRD chassis.
Suggested print settings:
- Material: PLA-CF / PETG / ABS (Printed parts in photos are PLA-CF)
- Orientation: Print upwards on the rear
- Layer: 0.2mm or lower suggested
- Supports: No
- Outerwalls: Min. 4
- Infill: 25% Cross hatch
- Brim: YES !! → I used 25mm outer brim
- Extra: Holes will perfectly friction fit an M3 bolt