Tubing Holder with clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tubing Holder with two screw options, zip tie option, and clip option. For hanging plants or mister line.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
These are printable tubing holders for drip line that you might route to hanging plants on the porch or patio. You could also use them for a patio mist system.
There are two screw size options. The larger one is for a drywall size screw. The smaller screw is for a #6 screw.
There are also two securing options. You could use a zip tie or you could print the clip and slide it over the holder. I think both are fine.
Printing the holder/clip in the same color as your tubing is a nice effect.
I chose to use the #6 screw, ¾", with the clip.
TBH, I chose to print the holder at a 15-degree angle (turn the model 15 degrees, then split the model), which strengthens the model (diagonal layering), helps with sliding the clip on, and reduces the material a bit.
Enjoy!