CSL DD/GT DD PRO Adapter for GT Lite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't want to drill holes in your plate, but still want to try your DD? Try this!
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 403
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Video where I go over this:
Provides about 8 extra degrees on steering angle. Also makes it easier to take on/off since you don't have to deal with the T nuts other than on the initial install of the adapter.
Hardware needed:
3 - T Nuts (Existing ones that came with the base)
6 - Washers
3 - M6 Nylon Lock Nuts (I super glued the edges before inserting on mine)
4 - M6 * 18mm Bolts
2 - M6 * 15mm Bolts (used for the central holes)
Finish off with 3mmish foam on top and bottom for the best & most secure fit. I used super glue to adhere. Exact Foam I used: https://low.es/3YjXEgx
(in all transparency it's easier to drill new holes in your plate, but this was fun to make)
-----------------------------------
I've had it available on a different website, but expanding it to Printables for further reach.