Lamp #63 - Puck Desk Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An offset tower lamp using a modified Bambu Lamp Kit 001 Base and Puck Led lamp.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
An offset tower lamp using a modified Bambu Lamp Kit 001 Base and Puck Led lamp.
Uses 1 M3 insert and 1 M3 by 6 mm fat head screw to attach modified Kit001 base to hood.
(See Pictures)
No supports required.
Assembly: (see pics)
1- Print all four parts
2- Melt M3 insert into the underside of the hood
3- Run Puck cable through puck holder and hood
4- Attach Puck Holder to hood using M3 by 6 mm screw
5- Insert Puck Led into Holder and snap on cover to hold in place
6- Run cable through stand and slide hood over stand .. fertig
The puck led used here:
(The example used a 5W, 2700K, Warm White)
https://www.aliexpress.com/item/1005006425667037.html?
1 x M3 by 6 mm flat head screw
https://de.aliexpress.com/item/32443118299.html?
1 x M3 Inserts
https://www.amazon.de/dp/B08BCRZZS3?
All 4 parts are printed using:
Eryone Matte Black PLA
The slicer settings:
.20 mm Standard
Infill % - 15 , Grid
Seam Position- Aligned