1 / 6
BMW Z4 (E89) double bottle holder for Yeti 12 / 18oz bottles — zdjęcie 1
1 / 6

BMW Z4 (E89) double bottle holder for Yeti 12 / 18oz bottles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Z4 has no suitable location for keeping a drinks bottle in the car.

Ocena
0 / 5
Polubienia
25
Pobrania
166
Wydruki
1
Wyświetlenia
1335
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I recently purchased an E89 Z4 and noticed quickly that there isn't an obvious place to store a drinks bottle when out and about. I knocked up this quick model which can be velcro'd into place on the bottom. 

October 2024 updates.

Now up to version 8.2! This time I've removed the net storage hold downs and bolting it down to this to prevent it moving during spirited driving. I found that a full bottle could cause it to tip forward and come out when using the brakes hard. I've removed the two plastic net holders and bolted it down there. 

This has meant the part has had to get larger and doesn't fit on my Bambu P1S. It's now in 4 parts:

  • Upper part which holds the water bottle. This has holes in the bottom for long M4 heatset inserts
  • Right and left lower parts to fit the bed of a P1S. This is affixed to the upper part using M4x16mm caphead bolts
  • Cap to cover the exposed bolts from the net hold down

Not yet tested with lively driving!