1 / 2
Futterhaus für Eichhörnchen / Feeding house for squirrels — zdjęcie 1
1 / 2

Futterhaus für Eichhörnchen / Feeding house for squirrels

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Futterhaus für Eichhörnchen / Feeding house for squirrels

Ocena
5 / 5
Polubienia
11
Pobrania
89
Wydruki
1
Wyświetlenia
560
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Diese Modell habe ich gemacht, da das Haus aus Holz nicht lange überlebt hat. Die Eichhörnchen hatten sehr schnell raus, dass sie nur den Deckel anheben müssen um an das Futter zu kommen.

Die einzelnen Teile sind mit PETG gedruckt.

Die Plexiglasscheibe ist 110 x 100 x 3 mm und kann nach oben heraus gezogen werden, zusätzlich werden noch 2 Senkkopfschrauben M3 x 20 und zwei Muttern M3 für den Deckel benötigt. 

Die einzelnen Teile werden mit Duebeln versehen und geklebt.

 

I made this model because the house made of wood has not survived for long. The squirrels had very quickly out that they only need to lift the lid to get to the food. 
The individual parts are printed with PETG.

The Plexiglas panel is 110 x 100 x 3 mm and can be pulled out, in addition 2 countersunk screws M3 x 20 and two nuts M3 are still for the lid needed.

The individual parts are provided with with a fly and glued.