Gloomhaven monster stand with spin dials, indented numbers and flange on the connecting stud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the design from ViperMan but wanted a couple changes: A stronger connection between the bottom and top pieces…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
I liked the design from ViperMan but wanted a couple changes:
- A stronger connection between the bottom and top pieces
- Indented numbers so I can paint them without the top scraping off the paint
The top and bottom weren't staying connected well for me in the original design. To make it easy to spin while staying connect I added a flange to the top of the stud on the base and an opening for the flange in the top piece. Note that I had to clean the hole in the top with an x-acto knife, so the hole may be slightly too small for the flange without shaving it.
In addition, I switched the numbers from being embossed to being engraved.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
No
Resolution:
0.16
Infill:
20%
Filament: Amazon Basics & Eryone Silk PLA
White & Gold
Notes:
The gold piece came out with some odd lines & artefacts as I tried to print it with concentric rings on the top instead of the default lines in Cura.
You might be able to get the numbers to print better than I did with a 0.2 nozzle, but I don't have one and they're still readable using a 0.4 nozzle.Category: Games