Zip Tied Hiarpin Table Leg Feet (1/2" lift)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a small table out of scrap plywood and a set of 28 Inch Hairpin Table Legs, (3 Steel Rods 1/2 Inch Pipe…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I made a small table out of scrap plywood and a set of 28 Inch Hairpin Table Legs, (3 Steel Rods 1/2 Inch Pipe Diameter). The provided floor protectors kept falling off the bottom of the legs, so I designed my own. I also wanted to elevate the table about a 1/2" (13 mm) in the process.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK4
Rafts:
No
Supports:
No
Resolution:
.2 mm
Infill:
20%
Filament: Overture TPU
Black
Notes:
Recommendations:
Infill pattern: Cubic
Perimeters/Shells: 3
Post-Printing
Attachment
Use standard Zip ties to attach to table legs.
About the design process...
I run Ubuntu Linux on all my home computers. This limits my choices for CAD software so I have taught myself how to use FreeCAD since there is a native Linux version that seems to be getting more stable as time goes by.
Category: Office