1 / 2
Shower Door Bottom Guide (used on Kinkead or Sterling tub enclosure doors) — zdjęcie 1
1 / 2

Shower Door Bottom Guide (used on Kinkead or Sterling tub enclosure doors)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are bottom guides with retainers that are used on Kinkead or Sterling tub enclosure doors.

Ocena
0 / 5
Polubienia
3
Pobrania
25
Wydruki
0
Wyświetlenia
237
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These are bottom guides with retainers that are used on Kinkead or Sterling tub enclosure doors.  I've printed these last year after making them and have only needed to replace the retainers 3 times during that time.

These retainers have gone under various revisions as the original design from the original product wouldn't print well and couldn't hold the pressure when being inserted and breaking after 1 or 2 months.  These are supposed to be more durable and hold on at least 6 or more months (the time I've had to test the new revision).



The main piece has been elongated to reduce wobbliness of the enclosure doors, but it may be a bit difficult to install. Also, the guide is a lot taller to reduce popping out of place.

UPTADE: The retainer has been modified to try to reduce the chances of breaking and make it easier to insert. If you have a recommendation on how to make this better, let me know please, I just want my bathroom doors to slide without coming out of place.  You can also rotate it 90° and it should hold better in place.

Every part has been carefully scaled and modeled after the original one and you should be able to interchange original with printed parts without issues.

This model doesn't require supports.

printed on a 0.16 mm preset with 15% of infill and 3 perimeters.

For a smoother feel I recommend enabling the ironing setting but knowing where it'll be, I'm sure there's no need.

 Any changes or additions wanted please let me know and I'll gladly consider your idea!

Tagi