Expandable screw organizer/storage tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable small parts or screw organizer with many small compartments, designed to fit a 300x300mm bed in two pieces.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 1078
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Dimensions: 300x148mm
Compartments:
5 60x12mm
13 40x12mm
18 30x12mm
18 25x12mm
36 20x12mm
4 19x12mm
1 40x22mm
1 19x22mm
2 30x22mm
2 25x22mm
4 20x22mm
2 22x22mm
Rafts: No
Supports: No
Resolution: >=0.2mm
Infill: I used 15% but really doesn't matter since it's 98% perimeters
Filament brand: One that works
Filament material: PLA I guess, less warping
Note: Maybe it's better to print just one tray/lid at a time since the corners on mine lifted off the bed slightly and warped because this print takes up the ENTIRE print area and bed adhesion is worse around the edges due to lower temperature