QHY PoleMaster Bracket for ZWO AM5 (non-N version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A QHY PoleMaster bracket for the original ZWO AM5 faceplate (non-N version).
- Ocena
- 4 / 5
- Polubienia
- 10
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 1142
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket mounts to the faceplate of the AM5. There are a number of other mounting options available, mostly utilizing the finder dovetail bracket on the side of the mount, but I wanted something with a cleaner appearance, which doesn't require supports and sits on the mount's RA axis.
Alternatively, you can also use the complete faceplate replacement.
Other parts required:
- 3x M3*4mm Threaded Insert (for mounting the camera to the bracket)
- 4x M3*16mm Hex Bolt (longer bolts to replace the four corner faceplate bolts)
Printing notes:
- No supports needed. Just print it flat.
- Recommended settings for good rigidity:
- PETG, 0.6mm nozzle
- 0.3mm layer height
- Gyroid, 25% infill
- 4 top and bottom shell layers (or 1.2mm when using other layer heights)
- 4 wall loops (or 2.4mm when using other nozzle sizes)
The correct bracket orientation is with the USB port of the PoleMaster facing left. You can mount the PoleMaster to the bracket using the three bolts that come with the camera.
Designed with Onshape.