ID Holder - Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ID Holder - Primarily designed for DoD CAC Holders that don't use RSA Tokens.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I saw several models that included RSA tokens or that only held one or two id's, but none that held 4+ and did NOT have the RSA space on the back. I designed this one using OpenSCAD so it could be adjusted for however many id's you need. I selfishly designed it for myself as I needed it to hold 5, but then I realized others could use it too!
I also included some area at the bottom so you can easily put some text there (at least I could with Bambu Slicer) for your organization.
I printed it with the base down even though it was angled and it worked best. Trying to print on back doesnt work as overhangs are too big and not really a good way to do supports int here.
I would do ABS or PLA ( I did both) - PETG failed miserably with it.