1 / 1
Prusa Mk4 Y axis belt tensioner for toothed idler — zdjęcie 1

Prusa Mk4 Y axis belt tensioner for toothed idler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modification of this improved Y axis belt tensioner to make it fit toothed idlers

Ocena
5 / 5
Polubienia
6
Pobrania
28
Wydruki
3
Wyświetlenia
516
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The original improved Y axis belt tensioner is great but only works with the smooth idler shipped with the Mk4 because the genuine Gates toothed idler is 1mm wider.  This modification increases the width of the idler cavity from 10mm to 10.5mm to fit the wider toothed idler and also reduces the other dimension of the cavity from 19mm to 17mm because the toothed idler's diameter is 2mm less than that of the smooth.

This is the genuine Gates idler used to model the new cavity:  https://www.filastruder.com/products/gates-2gt-idler?variant=32673878442055

Only the housing needed to be modified for toothed gears.  Please download the retainer and nut from the original project:  https://www.printables.com/model/585494-prusa-mk4-y-axis-belt-tensioner

Tagi