Headphone Case Clamshell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits many models. Tested with Sennheiser-EPOS Adapt 660 and also Sony WH-1000XM4
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 147
- Wydruki
- 2
- Wyświetlenia
- 862
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Don't let your headphones get crushed in the bottom of your bag with this protective case. It will likely work with many models, but I specifically designed it for my Sennheiser-EPOS Adapt 660. I also tested it with a friend's Sony WH-1000XM4 headphones.
The case is printed in two halves and should easily snap together. I used PLA and the latch+hinge mechanism worked fine.
Advanced users might have fun using slicer modifiers to vary fill densities and patterns for strength, efficiency, and looks. An example of this is included in the attached .3mf file. See @macro's make+comment.
1.1 update
- thicker latch to prevent snapping
- hinge ‘pin’ more aggressively angled to firmly hold pieces together at the cost of being harder to assemble