SOVOL SV08 CN3D Shroud

here you can find the last version

https://www.printables.com/model/938796-sv08-cn3d-shroud-v3-extra-fan-magnets-klicky-led

After making some tests we are glad to share with you the V2 Shroud 

The version 2 is using 2 more magnets to secure the shroud even more. better input shaping results! 
And also we have adapted the docking arm the first one was off by 2mm 
The V2 is without the stepdown.  and we found out that it can work with 3010 fan.
Some minor fitment adjustments have been done 

I will try my best to make a how to video as soon as possible until then i will let you see it in action.

The V2 has 2 versions one is with deeper holes for the original magnets to accommodate longer/deeper 4mm magnets. 4x4 instead of the original 4x3mm. 

I'm putting also the cad for the new changes so feel free to adapt it for your needs. 

To be able to use the docking arm in the place I'm using it i had to remove the pressure sensor. 
Otherwise I have removed the function for the Auto Z calibration, and since then never adjusted the Z offset or baby stepped.

I will try to move the docking position and to play a little bit more with the settings. 
we have released this update because we had a lot of request and we have consistent result even at 100c bed temp! 

After we will release the Video with How TO install Klicky we will release also the macros. 
Thanks for understanding but this it takes time. 

Print Settings: 

ABS or ASA
4 walls
5 Top/Bottom
0.2 Layer height
20-25% Infill 

Only here you need supports! 

Later edit: 23 June 2024

I have added the CAD so who want to take remix this can use the CAD
My time is limited and i want to focus to finish the test and to release Xenomorph that has way more features than this stock toolhead. 

Thanks for understanding. 

In order to print this toolhead use three Organic support ( it takes longer but they are easier to remove. and leave a cleaner surface).
Use BACK SEAM and rotate the model 45 degrees, 3 walls + arachne wall generator 
I'm trying to make it as light as possible and also to be rigid enough I don't want to increase the weight no need to have even more problems than the stock One. 

As you might now my unit didn't arrive yet so I need a feedback from you all to test fit this toolhead. 

This design was requested by the community because when you are using the enclosure the tool board reaches temperatures over 70c some members posted that they reached 80c on the MCU 

The Key features that we have are:

Fan for the Tool board 30x30x7 

thanks to @bombsquad85_502998  we have space to fit a 30x30x10 fan24v and conected in paralel with the hotend fan 

Now you can view your nozzle and what you are printing
Neopixel LED for the nozzle ( we need to figure out how to connect it to the tool board) we are using this type of LED https://s.click.aliexpress.com/e/_DBwKAWX 

For now you can use Klicky that we made for the SV08 https://www.printables.com/model/849409-klicky-probe-for-sovol-sv08-abl

BOM

2x M3 heat set insert 4mm long 4,5 OD  https://s.click.aliexpress.com/e/_Dd6WLYJ 

2x M3x8 SHCS  https://s.click.aliexpress.com/e/_DevOzD1 

1 x LED https://s.click.aliexpress.com/e/_DBwKAWX 

1 x fan 30x30x7 

I think we can use 5v from the USB to power up this fan or 24v to run it in parallel with the hot end fan 

DO IT AT YOUR OWN RISK
who wants to include a stepdown I made a version that includes a stepdown hided in the shroud. this is the exact model used https://s.click.aliexpress.com/e/_DEWMUWf
DO IT AT YOUR OWN RISK

for this mode you need 1 more heatset insert and 1xM3x5

also the 5v can be used to power up the LED and the toolhead fan. 

Sovol uses 4x3 Magnets i recommend buying some N52 (strong) magnets to don't  have any problem with the shroud 

Nozzle LED 

You can support my work here https://www.paypal.me/NDRNADIR all the donations are going to my 3D printing Project. 

You can follow us on

Tiktok 

Youtube 

Facebook