1 / 3
120mm Fanshroud for PNY XLR8 — zdjęcie 1
1 / 3

120mm Fanshroud for PNY XLR8

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed this Fanshroud to make my RTX2080 quieter. The Shroud lets you mount a 120mm Fan into the 90mm Fan mount.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
171
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

I designed this Fanshroud to make my RTX2080 quieter. The Shroud lets you mount a 120mm Fan into the 90mm Fan mount. The Fanshroud screws into the existing Fanmount

 

Per Shroud you'll need:

  • M3x6mm Countersunk Screw x3
  • M3 Nut x3
  • (Optional) M3 Washer x3
  • Fan 120mm 
  • Fan Screw or Noctua NA-SAV2 Fanmount or similar x4

I recommend you use the Motherboard headers for the Fans in combination with a Y-Splitter, because the Fancontroller on the GPU might be too weak or unoptimised to drive two 120s. I use a program named “Fan Control” which lets me control the Fans way better than the Motherboard control ever can.

 

Links

The used Fan:   https://www.arctic.de/P12-Max/ACFAN00280A/

Fan Control:   https://getfancontrol.com/

Noctua Fanmount:   https://noctua.at/en/na-sav2

 

My Printsettings

  • Prusa MK3s+ 
  • 0,4mm Nozzle
  • 0,15mm Layerheight
  • PLA

 

Tagi