Gridfinity Router Table Setup Block Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 4x4x5 Gridfinity holder for my Neitra router table setup blocks.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 73
- Wydruki
- 2
- Wyświetlenia
- 1081
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A 4x4x5 Gridfinity organizer for my set of Neitra setup blocks (amazon.com/gp/product/B0C1NVK1N9/). I designed this around my set, but it should work for any setup blocks 5.5" long. The ¾" block sticks out a little farther than the others to save on material vs. using a deeper holder.
The slots have 0.02" tolerances which worked great printed in Prusament on my Prusa Mini with 0.4mm nozzle and the default 0.25mm draft mode in Prusa Slicer.
Edit: I've uploaded a second version of the file that uses 0.04" tolerances. I removed the original version, since I noticed my blocks are extra snug now that it's gotten cold out.